Komatsu — Finding a Station

Radio / CD Player - Section 70 OM7006 Page 70-4 After 5 seconds of inactivity, the receiver will return to the default display and the volume level at which the receiver was previously playing. After selecting the satellite band, press and release the +TUNE/SEEK- button to move to the next chan- nel. Pressing and holding the +TUNE/SEEK- button for more than two seconds will increase the speed at which the radio tunes up or down to a rate of about 10 channels/second. NOTE: The alarm will be activated unless the ALARM button is held for 2 seconds again. PROGRAM TYPE SEARCH (PTY): If subscribed to XM or Sirius Satellite Radio, Program Type Search allows you to seek by music type.

To perform a PTY search: USING THE RADIO Finding a Station BAND (2): Press this button to switch between AM, FM1, FM2, FM3, Weather (WX) and Satellite Bands (XM1, XM2 or SR1, SR2). The receiver display will show your selection. 1. Press Scan and Preset 1 at the same time. PTY will appear on the radio display. 2. Press Preset 1 until the type of programming you want to listen to (rock, classical, etc.) appears on your radio display. NOTE: If the radio requires an external Satellite receiver and one is not connected to the radio, the Satellite bands will NOT appear when the BAND (2) button is pressed. 3.

Press the +TUNE/SEEK- (6) button to select a station of the program type you selected in step 2. Continue to press the +TUNE/SEEK- button to move through the list of stations available in that program type. Station names will appear on the radio display. NOTE: If the radio has an internal Satellite receiver but Satellite service has not been activated, the display will show XM NOT ACTIVATED or SR NOT ACTIVATED. The radio can also scan all of the stations by pro- gram type. After selecting a program type: +TUNE/SEEK- (6): Press and hold both +TUNE and BAND (2) for 2 seconds to switch between manual tune and seek modes. The display will show either MANUAL or SEEK to indicate the mode. 1.

Press SCAN/DIM (9) to scan all available sta- tions of that program type. 2. Press SCAN/DIM (9) again to stop scanning. MANUAL TUNE: Press the +TUNE/SEEK- (6) but- ton once to tune to the next higher or lower station, one frequency at a time. Holding +TUNE/SEEK- for more than half a second begins fast tuning. AUDIO STORE (AUTO): AUTO automatically stores the 6 strongest stations onto pushbuttons 1-6. Press and hold PSCN/AUTO (8) until AUTO and the AS icon appear on the display. AUTO STORE only saves presets in the band to which you are listening. If you press AUTO while listening to FM1, the presets on AM, FM2, FM3 and WX will not change.

Pressing and holding AUTO again for more than 2 seconds will cancel Auto Store, and the original presets will be restored. SEEK: Press the +TUNE/SEEK- (6) button once to tune to the next higher or lower station. Holding +TUNE/SEEK- for more than half a second activates the Seek function, and SEEK will appear on the dis- play. When a station with a strong enough signal is found, Seek will stop and the station will play. If a sta- tion is not found with a strong enough signal after searching the band twice, the Seek function will end and NO STATION FOUND will appear for 5 seconds. Then, the default display will appear and the radio will continue to play.

Seek can be cancelled by press- ing +TUNE/SEEK- again. NOTE: AUTO STORE is not active for satellite brands.