Safety - Section 20 OM2044 Page 20-8 Working On Loose Ground Avoid operating the machine near cliffs, overhangs, and deep ditches. If these areas collapse, the machine could fall or tip over and result in serious injury or death. Remember that ground surfaces in these areas may be weakened after heavy rain or blasting. Turn the key switch to the OFF position and wait for the engine to stop. This could take up to three minutes for a hot engine to cool down. After the engine has stopped, wait two minutes before exiting the cab. If any warning lights are illuminated or warning horns are sounding, DO NOT leave the cab and notify maintenance personnel immediately.
Freshly laid soil and the soil near ditches is loose. It can collapse under the weight or vibration of the machine. Avoid these areas whenever possible. When exiting the machine, always lock compartments, and take the keys with you to prevent entry from unauthorized persons. Place wheel chocks around the wheels to prevent the truck from rolling. Parking The Machine Ensure the truck body is empty. Completely lower the dump body by placing the hoist control lever in the FLOAT position. TOWING Improper towing methods may lead to serious per- sonal injury and/or damage. Choose a horizontal road surface to park the machine.
If the machine must be parked on a slope, follow local regulations to secure the truck to prevent the machine from moving. Tow with a solid tow bar. DO NOT tow with a cable. Move the directional control lever to PARK (this will apply the parking brake). Use a towing device with ample strength for the weight of this machine. NOTE: DO NOT apply the wheel brake lock. Never tow a machine on a slope. When connecting a machine to be towed, DO NOT allow anyone to go between the tow machine and the disabled machine. Set the coupling of the disabled machine in a straight line with the towing portion of the tow machine, and secure it in position.
DO NOT stand next to the towing device while the truck is moving. (For towing method, see the Operation and Mainte- nance Manual, Section 30, Operating Instructions - Towing.)