Komatsu — INSTRUMENT PANEL

OM3242 Operator Cab And Controls - Section 32 Page 32-13 INSTRUMENT PANEL Control Symbols This symbol when it appears on an indicator or control identifies that this indicator or control is NOT used. The operator must understand the function and oper- ation of each instrument and control. Many control functions are identified with international symbols that the operator must learn to recognize immedi- ately. This knowledge is essential for proper and safe operation. Items that are marked optional do not apply to every truck. This symbol identifies a rotary control or switch. Rotate the knob clockwise or counterclockwise for functions.

The following symbols are general indicators and may appear in multiple locations and combinations on the instrument panel. Most switches have two LED lights inside them, one amber and one green in color. The amber is located in the top portion of the switch and indicates that function has been activated. The green LED is located in the lower portion of the switch and indi- cates that function has not been activated. This symbol identifies a switch used to test or check a function. Press the switch on the side near the symbol to perform the test. To activate a function, push on the top portion of the switch. At this time, the amber LED will be illuminated, and the green LED will be OFF.

To de-activate a function, push on the lower portion of the switch. At this time, the green LED will be illuminated, and the amber LED will be OFF. NOTE: The green LED light in the hazard light switch, head light switch and the ladder light switch will be illuminated when battery power is connected to the truck. The LED lights in the other switches will illuminate when the key switch is turned to the ON position.