TOWING 1820 - TRANSPORTATION 33 TOWING p 1820 - TRANSPORTATION 33 TOWING TOWING This trencher is not designed to be towed. If it must be moved without its own power, optional Spare Hub Assembly should be used. This trencher is not designed to be towed. If it must be moved without its own power, optional Spare Hub Assembly should be used. Spare Hub Assembly is designed for temporary use for distances less than 500’ (150 m) at slow rate of speed. Assembly should only be used for towing. Spare Hub Assembly is designed for temporary use for distances less than 500’ (150 m) at slow rate of speed. Assembly should only be used for towing.
Spare hub assembly is stored near right drive tire, under guard. Spare hub assembly is stored near right drive tire, under guard. Optional Spare Hub Assembly Optional Spare Hub Assembly 1. Remove guard covering assembly. 1. Remove guard covering assembly. 2. Remove two mounting bolts and remove assembly from storage position. 2. Remove two mounting bolts and remove assembly from storage position. 3. Securely block right side of trencher. Right wheel should be off ground. 3. Securely block right side of trencher. Right wheel should be off ground. IMPORTANT: On diesel units, right tire and wheel assembly is filled with tire ballast and weighs approximately 127 lb (58 kg). IMPORTANT:
On diesel units, right tire and wheel assembly is filled with tire ballast and weighs approximately 127 lb (58 kg). 4. Remove right wheel. 4. Remove right wheel. 5. Place assembly on lug bolts and attach with lug nuts. If wrench will not fit through access holes, remove snap ring and outer flange, tighten lug nuts, and replace flange and snap ring. 5. Place assembly on lug bolts and attach with lug nuts. If wrench will not fit through access holes, remove snap ring and outer flange, tighten lug nuts, and replace flange and snap ring. 6. Remove lug nuts from spare hub assembly bolts. 7. Place right wheel on assembly. 6. Remove lug nuts from spare hub assembly bolts. 7.
Place right wheel on assembly. 8. Securely fasten wheel with lug nuts. 8. Securely fasten wheel with lug nuts. 9. Lower trencher. 9. Lower trencher. 10. Push axle lock to disengage. Machine will freewheel. 10. Push axle lock to disengage. Machine will freewheel. 11. Slowly tow trencher. 11. Slowly tow trencher.