Ditch Witch 1820 — SPECIFICATIONS

1820 - SPECIFICATIONS 83 1820 - SPECIFICATIONS 83 p **Exceeding this operating angle will cause engine damage. This DOES NOT IMPLY machine is stable to maximum angle of engine operation. POWER TRAIN:

Ground Drive Transmission (Drive and Dig) Infinitely variable from zero to maximum, enclosed gear box to axle, speed and direction controlled with single lever Clutch Mechanical, hand operated, spring loaded with tension roller for belt drive Belt 2 strand 3V "Power Band" Tires - drive 23 x 8.50 - 12 23 x 10.50 - 12 (option) Tire - trail 16 x 6.50 - 8 Trencher Drive Mechanical - Belt drive to enclosed reduction drive, headshaft Belt 3 strand "Power Band" Digging chain 33,000 lb (15000 kg) test Chain drive sprocket Forged and tempered Digging tools Bolt-on cup teeth with hard surfaced edge of tungsten carbide Spoil Handling Drive Mechanical, attached to and rotates with headshaft **Exceeding this operating angle will cause engine damage.

This DOES NOT IMPLY machine is stable to maximum angle of engine operation. POWER TRAIN:

Ground Drive Transmission (Drive and Dig) Infinitely variable from zero to maximum, enclosed gear box to axle, speed and direction controlled with single lever Clutch Mechanical, hand operated, spring loaded with tension roller for belt drive Belt 2 strand 3V "Power Band" Tires - drive 23 x 8.50 - 12 23 x 10.50 - 12 (option) Tire - trail 16 x 6.50 - 8 Trencher Drive Mechanical - Belt drive to enclosed reduction drive, headshaft Belt 3 strand "Power Band" Digging chain 33,000 lb (15000 kg) test Chain drive sprocket Forged and tempered Digging tools Bolt-on cup teeth with hard surfaced edge of tungsten carbide Spoil Handling Drive Mechanical, attached to and rotates with headshaft HYDRAULIC SYSTEM:

U.S. METRIC Drive pump capacity @ 3200 rpm 12.6 gpm 48 L/min Filtration Return flow, 10 micron nominal Hydraulic motor, drive Torque @ 2000 psi (138 bar) and 12.6 gpm (48 L/min) 1347 in•lb. 152 N•m Speed @ 2000 psi (138 bar) and 12.6 gpm (48 L/min) 542 rpm 542 rpm Displacement/rev 4.9 in3 80 cm3 Pump capacity, drilling @ 3200 rpm 5 gpm 19 L/min Hydraulic motor, drilling HYDRAULIC SYSTEM: U.S. METRIC Drive pump capacity @ 3200 rpm 12.6 gpm 48 L/min Filtration Return flow, 10 micron nominal Hydraulic motor, drive Torque @ 2000 psi (138 bar) and 12.6 gpm (48 L/min) 1347 in•lb.

152 N•m Speed @ 2000 psi (138 bar) and 12.6 gpm (48 L/min) 542 rpm 542 rpm Displacement/rev 4.9 in3 80 cm3 Pump capacity, drilling @ 3200 rpm 5 gpm 19 L/min Hydraulic motor, drilling