1820 - SPECIFICATIONS 85 1820 - SPECIFICATIONS 85 p NOISE LEVEL NOISE LEVEL Operator 89 dBA sound pressure per ISO 6394 Operator 89 dBA sound pressure per ISO 6394 Exterior 100 dBA sound power per ISO 6393 Exterior 100 dBA sound power per ISO 6393 Specifications are called out according to SAE recommended procedures. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that described. Specifications are called out according to SAE recommended procedures. Specifications are general and subject to change without notice.
If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that described. FLUID CAPACITIES: U.S. METRIC Fuel tank Gasoline 5.4 gal 20.4 L Diesel 6.5 gal 24.6 L Engine oil: Honda 1.5 pt 1.4 L Kubota 0.84 gal 3.2 L Hydraulic reservoir 5.5 gal 20.8 L Hydraulic system 6.25 gal 23.7 L Headshaft reducer oil 2.5 pt 1.2 L Axle reducer oil 2.5 pt 1.2 L BATTERY: Group 26R, 12-volt, top-post; SAE Reserve Capacity 60-80 min.; SAE cold crank 450 amps. VIBRATION LEVEL Vibration at the operator's hand during normal operation is 3.25 m/s2. FLUID CAPACITIES: U.S.
METRIC Fuel tank Gasoline 5.4 gal 20.4 L Diesel 6.5 gal 24.6 L Engine oil: Honda 1.5 pt 1.4 L Kubota 0.84 gal 3.2 L Hydraulic reservoir 5.5 gal 20.8 L Hydraulic system 6.25 gal 23.7 L Headshaft reducer oil 2.5 pt 1.2 L Axle reducer oil 2.5 pt 1.2 L BATTERY: Group 26R, 12-volt, top-post; SAE Reserve Capacity 60-80 min.; SAE cold crank 450 amps. VIBRATION LEVEL Vibration at the operator's hand during normal operation is 3.25 m/s2.