Multiplexed Electrical System Service Manual 7 PM819023/KM815057 (08/14/2012) 7 - 3 CECU Parameter Part Number Parameter Description Min. Value Max. Value Explanation Q30-1024-007 Clock Alarm Available 0 1 Parameter is used to determine if the alarm clock will be displayed on the information display. Value 0/Disabled means Alarm Clock is not available in information display. Value 1/Enabled means Alarm Clock is available in information display Q30-1024-008 Clock Available 0 1 Parameter is used to determine if the clock will be displayed on the information display. Value 0/Disabled means Clock is not available in information display.
Value 1/Enabled means Clock available in information display Q30-1024-009 Diagnostics Available 0 1 Parameter is used to determine if the diagnostics will be displayed on the information display. Value 0/Disabled means Diagnostic is not available in information display. Value 1/Enabled means Diagnostic is available in information display Q30-1024-010 Ignition Timer Available 0 1 Parameter is used to determine if the ignition timer will be displayed on the information display. Value 0/Disabled means Ignition Timer is not available in information display.
Value 1/Enabled means Ignition Timer is available in information display Q30-1024-011 Languages Available 0 1 Parameter is used to determine if other languages are available on the information display. Value 0/Disabled means Language selection is not available in information display. Value 1/Enabled means Language selection is available in information display Q30-1024-012 RPM Detail Available 0 1 Parameter is used to determine if the RPM information will be displayed on the information display. Value 0/Disabled means RPM information is not available in information display.
Value 1/Enabled means RPM information is available in information display Q30-1024-014 Trip Information Available 0 1 Parameter is used to determine if the trip information will be displayed on the information display. Value 0/Disabled means Trip Information is not available in information display. Value 1/Enabled means Trip Information is available in information display Q30-1024-015 Truck Information Available 0 1 Parameter is used to determine if the truck information will be displayed on the information display. Value 0/Disabled means Truck Information is not available in information display.
Value 1/Enabled means Truck Information is available in information display Q30-1024-016 Highline Menus Wraparound 0 1 Parameter is used to control the scrolling in information display. Value 0/Disabled means that the menu will stop when it reaches the top or the bottom of the list when scrolling. Value 1/Enabled means that the menu will wrap around when it reaches the top or the bottom of the list when scrolling. Q30-1024-017 Dome Lamp Controlled By Door 0 1 Parameter is used to determine if the dome lamps are controlled by the (driver/passenger) door. Value 0/Disabled means the door does not control the dome lamps. Value 1/Enabled means the door does control the dome lamps.