PACCAR Corporation — Parameter Part Numbers

Multiplexed Electrical System Service Manual 7 PM819023/KM815057 (08/14/2012) 7 - 17 CECU Parameter Part Number Parameter Description Min. Value Max. Value Explanation Q30-1024-137 Advanced ABS Installed 0 1 Parameter is used to determine if Advanced ABS is installed. Value 0/Disabled means Advanced ABS is disabled. Value 1/Enabled means Advanced ABS is enabled. This parameter is required for trucks with Bendix Advanced Cruise with Braking (ACB) Q30-1024-138 Water In Fuel Warning Enabled 0 1 Parameter is used to determine if the Water In Fuel warning pop-up message is enabled.

Value 0/Disabled means the Water In Fuel Pop-up warning message will not display when the appropriate condition exists. Value 1/Enabled means the Water In Fuel Pop-up warning message will display when the appropriate condition exists. Q30-1024-139 Variable Speed Fan Cutoff Vehicle Speed 5 50 Parameter is used to set the vehicle speed cut off for the Variable Speed Fan. Value 5 means below 5 MPH the CECU sends the value of Variable Fan Low Speed Value (Q30-1024-140) for the Engine Fan and above 5 MPH the CECU sends the value of 100% for the Engine Fan when the appropriate conditions exist.

Value 50 means below 50 MPH the CECU sends the value of Variable Fan Low Speed Value (Q30-1024-140) for the Engine Fan and above 50 MPH the CECU sends the value of 100% for the Engine Fan when the appropriate conditions exist. Q30-1024-140 Variable Speed Fan Low Value 0 100 Parameter is used to set the Variable Speed Engine cooling fan when the engine permits the input from the CECU. Value 0/ means that the CECU is requesting 0% engine fan engagement. Value 0/ means that the CECU is requesting 1000% engine fan engagement. Q30-1024-141 Variable Speed Fan Enable 0 1 Parameter is used to determine if the Variable Speed Fan is installed.

Value 0/Disabled means Variable Speed Fan is not installed. Value 1/Enabled means the Variable Speed Fan is installed. This parameter is required for the Borg Warner Cool Logic Fans. Q30-1024-142 Brake Application Air on V-CAN 0 1 Parameter is used to determine if the brake application air pressure is broadcast on the V-CAN. Value 0/Disabled; not broadcast on the V-CAN. Value 1/Enable; broadcast on the V-CAN. Q30-1024-143 Main Transmission Oil Temp on V-CAN 0 1 Parameter is used to determine if the main transmission oil temperature is broadcast on the V-CAN. Value 0/Disabled; not broadcast on the V-CAN. Value 1/Enable; broadcast on the V-CAN.

Q30-1024-144 Trip Average Fuel Economy on V-CAN 0 1 Parameter is used to determine if the trip average fuel economy is broadcast on the V-CAN. Value 0/Disabled; not broadcast on the V-CAN. Value 1/Enable; broadcast on the V-CAN.