24. SERVICE PROCEDURE 24.3 CHECK BEFORE STARTING 24.3.1 CHECK COOLANT LEVEL, ADD WATER Do not remove the radiator cap if the coolant is hot. Hot water Wait for the water temperature to go down, turn the radiator cap slowly to release the pressure, then remove it. 1. Open the top cover at the front of the machine. 2. Remove radiator cat 0, and check that the coolant is up to the shaded area. Add water if necessary. NOTICE If more water than normal must be added, there is probably leakage, so check for the location of the leakage. I AE077420 24.3.2 CHECK FUEL LEVEL A WARNING When adding fuel, never let the fuel overflow. This may cause a fire. Wipe up any fuel that is spilled. 1.
Remove the cap, then check the fuel level with oil level gauge 0. 2. After completing operations, add fuel through fuel filler @ to fill the tank. 3. After adding fuel, tighten the cap securely. Fuel capacity: 250 e (66 US gal, 55 UK gal) NOTICE If breather hole @ in the cap is clogged, the pressure inside the tank will go down and the fuel may stop flowing, so clean the breather hole from time to time. AE077430 3-37