27. USING SEAT BELT 27.1 SEAT BELT (For fixed type) When operating a machine equipped with ROPS, be sure to use the seat belt. AL WARNING l Before fastening the seat belt, inspect the securing brackets and belt for abnormal conditions. Replace any worn or damaged seat belt or the securing brackets. l Adjust and fasten the seat belt before operating the machine. l Do not use seat belt with either half of the belt kinked. l Always use seat belt when operating the machine. 27.1.1 FASTEN THE BELT AND REMOVE IT IN THE FOLLOWING MANNER Adjust the seat so that the brake pedal can be depressed all the way with the operator’s back against the backrest. After positioning the seat, sit in the seat.
Hold buckle @ with your left hand and tongue @ with our right hand, put the tongue into buckle 0. Check that the belt has locked by pulling it. AE078080 When removing the belt, raise the tip of the buckle lever to release it. Fasten belt along your body without kinking it. Adjust the lengths of the belt on both the buckle and the tongue sides so that the buckle is located at the mid-point of your body front. 5-3