Connecting the booster cables Keep the starting switch at the OFF position. Connect the booster cable as follows, in the order of the num- bers marked in the diagram. 1. Make sure that the starting switches of the normal machine and problem machine are both at the OFF position. Connect one clip of booster cable @ to the positive @ terminal of the oroblem machine. Connect the other clip of booster cable @ to the positive @ terminal of the normal machine. Connect one clip of booster cable @ to the negative 0 terminal of the normal machine. Connect the other clip of booster cable @ to the negative block of the problem machine. 2. 3. 4. 5. Starting the engine 1.
Make sure the clips are firmly connected to the battery terminals. 2. Start the engine of the normal machine and keep it to run at high idling speed. 3. Turn the starting switch of the problem machine to the START position and start the engine. Refer to “12.2 STARTING EN- GINE”. 2-53