0-5 HOW TO USE THIS MANUAL EXPLANATION METHOD 1. Operation procedure (1) The operation procedure is described in either pattern A or pattern B below. Pattern A:Explanation of each operation step with illustration. Pattern B:Explanation of operation procedure by indicating step numbers in one illustration, followed by explanation of cautions and notes summarized as point operations. 0 Example of description in pattern B DISASSEMBLY INSPECTION REASSEMBLY Tightening torque unit T = N m (kgf-cm) [ft-lbf] Step Nos. are partially sometimes omitted in illustrations.
When a part requiring tightening torque instruction is not indicated in the illustration, the part name is described in the illustration frame. T = 46.1 ~ 48.1 (470 ~ 490) [34.0 ~ 35.5] Disassembly Procedure 1 Remove the cover. [Point 1] 2 Remove the bushing [Point 2] Н Operation explained later 3 Remove the gear. Point Operations Explanation of key point for operation with an illustration У [Point 1] Disassembly: Put a match mark when removing the pump cover. [Point 2] Inspection: Measure the bushing inside diameter. Limit: 19.12 mm (0.7528 in)