PACCAR Inc. — Exterior Lights Self Test

SWITCHES 5. Power Window Switch Exterior Lights Self Test Lo beam headlamps Power window rocker switches are located on the door pads. Depress the switch to open the window or pull up on the switch to close the window. Release the switch to stop window movement. The drivers side window has an express down feature. Pushing on the switch all the way down until the switch bumps will activate the express down feature. Release the button and the window will continue to open until it is completely open. To start the Exterior Light Self-Test (ELST) feature: First set of fog/driving lights The test will turn those lights off and then illuminate the: 1. Park the vehicle and set the parking brakes. 2.

Insert the key into the ignition, start the engine and allow the vehicle to run through its own Power On Self Test. Park lights Side marker lights 3 Hi beam headlamps 3. Press the momentary switch on the dash to start the ELST. Stop/Brake lights This feature allows the operator to verify and inspect exterior lighting operation typically performed during a pre-trip inspection. When the feature is engaged, via a switch on the dash, it will illuminate the: After turning these lights off, the system will resume testing the first set of lights. The light test will eventually stop on its own.

The operator may interrupt the test by turning the vehicle off or pressing the switch a second time while the test is running. The operator can verify the light functionality by visibly watching the light from outside the vehicle during the test or can read the instrument cluster for any faults displayed that are lighting related. Park lights Side marker lights Hazard/turn signals 3-77