PACCAR Inc. — Operating Manual Transmissions

OPERATING THE TRANSMISSION OPERATING THE TRANSMISSION If the transmission is not shifting smoothly into gear while the clutch pedal is completely pressed to the floor, then it is time to have the clutch and hydraulic system inspected and serviced. Operating Manual Transmissions Operating Hydraulic Clutch (Manual Transmission) The transmission shift pattern for your vehicle may be located on the shift control knob. In addition to understanding the shift pattern and its location, you should read the transmission manufacturer’s manual provided with your vehicle before operating the vehicle. Manual transmissions will also have a clutch pedal situated to the left of the brake pedal.

Pressing down on the clutch pedal will disengage the clutch and will allow the transmission gears to be shifted. CAUTION Do not push the clutch pedal completely to the floor when shifting while the vehicle is in motion. using the clutch brake while shifting a vehicle in motion will damage the clutch brake. A non functioning clutch brake will make shifting very difficult when the vehicle is stationary. 4 At the beginning of the pedal stroke, there will be about Ѕ inch (13 mm) of movement before any resistance is felt. As the pedal is pressed further, the operator will feel increased resistance as the clutch is disengaged.

After the clutch has been fully disengaged, there will be another 1 - 1 1/2 inches (25 -40 mm) of pedal travel which will engage the clutch brake. At this full stroke, the pedal will feel like it cannot be pressed anymore. If the clutch pedal is pressed completely to the floor and the transmission is not shifting, then it is time to have the clutch adjusted or serviced. 4-14