PACCAR Inc. — Introduction

OPERATING THE BRAKE SYSTEM use, the ASR Warning Lamp blinks continuously. traction surfaces such as loose gravel, sand and dirt. Allows retarders to function independently of the ABS function. While the off-road mode can improve vehicle control and shorten stopping distances, some steering ability may be reduced on certain surfaces resulting from the momentarily sliding tires. Always operate your vehicle at safe operating speeds. Failure to do so may cause you to lose control of the vehicle and could result in an accident or personal injury. WARNING Off-Road ABS Function Switch (option) Your vehicle may be equipped with a separate switch to activate an Off-Road ABS function.

This function is NOT to be used for On-Highway driving but is intended to be used to improve stopping performance in Off-Highway conditions (e.g. loose gravel and mud). The Off-Road ABS function is accomplished by allowing a “wedge” of material to build-up in front of momentarily locked wheels. If your vehicle does not have an engine retarder, the Off- Road ABS switch will function the same. CAUTION Never drive your vehicle on improved roads/highways with the Off-Road ABS function turned on. When you drive your vehicle onto an improved road surface or highway, immediately turn off the Off-Road ABS switch.

Failure to do so will cause the ABS system to not function properly in an ABS event under 25 mph and could result in an accident or personal injury. 4 How The Off-Road ABS Function Works Features and Benefits The ABS lamp flashes slowly during off-road mode engagement. This is done to alert you of a modification to the ABS control software. Changes the ABS control limits to allow for a more aggressive ABS function while off-road. Improves vehicle control and helps reduce stopping distances in off-road conditions or on poor At speeds above 25 mph, the ABS controller operates in the normal on-highway mode. 4-31