LUBRICANT SPECIFICATIONS Master Lubrication Index 5 boxes, transfer cases, etc.) the oil must be level with the filler opening. The responsibility for meeting these specifications, the quality of the product, and its performance in service rests with the lubricant supplier. NOTE Use care when checking the oil level with a finger. Just because you can reach the oil level with a finger, does not mean the oil level is correct. 1 Improper Oil Level 2 Proper Oil Level For oil reservoir with side filler plugs (transmission, axles, steering gear 5-36 Lubricant Symbol Key ATF MD3 or MERCON®-approved automatic transmission fluid BB High temperature ball bearing grease.
Chevron SRI Mobile Grease HP, Texaco Multifax 2 or equivalent CB Engine oil for mild to moderate requirements CC/CD Engine oil for severe requirements (MIL-L-2104B /MIL-L-45199B w/ 1.85% max. sulfated ash content) CD Engine oil meeting API “Five engine test sequence” CD50 SAE50W synthetic transmission fluid CE Engine oil meeting severe duty service requirements for direct-injection turbocharged engines CJ-4 Engine oil for PACCAR MX and Cummins EGR engines CL Multipurpose chassis grease EP Extreme Pressure Lubricant (Lithium 12-hydroxystearate base NGLI 2) GL Straight mineral gear lubricant HD Hypoid Gear Oil, A.P.I.
- GL-5, SAE 75W-90FE synthetic gear lubricant HT High Temperature grease (Timken Spec. 0-616) MP Multipurpose gear lubricant (MIL-L-2105B) DOT3 or DOT4 Brake Fluid