ELECTRICAL Vocational - Headlight Replacement Headlight Aiming Bulb Specifications The headlights were properly aimed at the factory to meet safety specifications. If the headlights need to be adjusted, please have an authorized dealership aim the headlights. Turn the bulb lock ring counterclockwise and remove the bulb. Do not allow the glass of the new headlamp bulb to come into contact with anything. The glass could become contaminated and cause bulb failure. Reassemble in reverse order.
5 5-77 Bulb Location Type of Bulb Low Beam Halogen H11-LL (SAE), H7 (ECE) (long life version not required) Low Beam HID D1-S High Beam Halogen HB3A – LL (long life version not required) Daytime Running Lamp/ Position Lamp/Turn Signal/ Side Marker 4157K (SAE), 3157K (ECE) Rear tail light/ Turn Signal Not applicable – LED lighting Interior map/dome/indirect light Not applicable – LED lighting