ELECTRICAL Replacing Parts Removed for Access Make sure to reconnect the ground (negative) cable last. NOTE Fairings not installed properly could come loose and cause other motorists to have an injury accident. It is important that fairings be installed properly. Failure to comply may result in death, personal injury, equipment or property damage. WARNING 1. Replace battery cover. 2. Install 2 bolts in step strut. Torque to 24-32 lb-ft (33-43 Nm). 1. Place batteries in vehicle and tighten bolt of holding plate. 2. Reconnect positive cable. 3. Install fairing and install 4 bolts. Torque to 6-7 lb-ft (8-9 Nm). 3. Reconnect ground (negative) ground cable. 4.
Install steps by installing 2 bolts in each step. Torque to 24-32 lb-ft (33-43 Nm). WARNING WARNING Before attempting any work on the batteries or electrical system, remove all jewelry. If metal jewelry or other metal comes in contact with electrical circuits, a short circuit may occur causing you to be injured, as well as electrical system failure and damage. Battery replacement may alter or disturb battery cable routing. Check to insure battery cables are free from any point of chaffing. Failure to comply may result in death, personal injury, equipment or property damage. Always reinstall the steps before entering the cab.
Without the steps you could slip and fall, resulting in possible injury to yourself. WARNING 5 5-86