FUEL SYSTEM FUEL SYSTEM Specification Fuel Filters Location of Fuel Shut-off Valves Use only diesel fuel as recommended by engine manufacturers. Please follow these recommendations when you are changing your fuel filters or strainer elements. Your engine will run better and last longer if you do. See the engine manufacturer’s recommendations for proper water and micron requirements. Fuel shut-off valves for the fuel crossover line are on the bottom of the secondary fuel tank, at the crossover line connection. They are optional on the primary fuel tank.
WARNING A mixture of gasoline or alcohol with diesel fuel in the presence of an ignition source (such as a cigarette) could cause an explosion resulting in death or personal injury. Use only the recommended diesel fuel. When removing filters, cover any electrical equipment and wiring that might get soaked with fuel. Diesel fuel may permanently damage electrical insulation. CAUTION 5 If anyone ever pours gasoline into your fuel tank, drain the entire system. Otherwise, the pump and engine will be damaged. Don’t try to dilute the gasoline by adding diesel fuel (See Warning above). When installing spin-on (throwaway) filters, hand tighten them only to 1/2 to 2/3 turn after gasket contact.
Over-tightening these filters may distort or crack the filter head. 5-100