PACCAR Inc. — Steering Shaft

STEERING SYSTEM between the Maximum and Minimum level indicators. Fluid Filter Replacement Steering Shaft The following are common torque specifications for most steering shafts. Torque on U–joint pinch bolt and nut (7/16 in) 74–81 Nm (55 to 60 lb-ft), lubricated. Torque on Pitman arm clamp bolt and nut (3/4 in): 406–433 Nm (300 to 320 lb-ft), lubricated. For off–highway vehicles, tighten the U–bolts after the first day or two of operation. Then check weekly. 5 CAUTION Servicing the power steering system without bleeding it of trapped air may cause damage to the power steering pump. 1. Replace both fluid and filter as per the chart below. 2. Bleed the system if necessary. 5-132