PACCAR Inc. — Component Identification

CONSUMER INFORMATION AND VEHICLE IDENTIFICATION Paint Identification Label Federal Safety Standard Certification Label Component Identification The Paint Identification Label contains the paint colors used by the factory to paint your vehicle. It lists frame, wheels, cab interior and exterior colors. This label is located inside the glove box. Each of the major components on your vehicle has an identification label or tag. For easy reference, record component numbers such as, model, serial, and assembly number. The NHTSA regulations require a label certifying compliance with Federal Safety Standards, for United States and U.S.

Territories, be affixed to each motor vehicle and prescribe where such label may be located. This certification label, which indicates the date of manufacture and other pertinent information, is located on the driver’s side door edge or on the driver’s side door frame. Engine: For further information, please refer to the Engine Operation and Maintenance Manual. Transmission: For both manual and automatic transmissions, the identification number is stamped on a tag affixed to the right rear side of the transmission case. Clutch: Enclosed in clutch housing. Location depends on manufacturer. 6 Steer Axle: The front axle serial number is stamped on a plate located on the center of the axle beam.

Drive Axles: The drive axle numbering system includes three labels or stamps: 6-6