START-UP 1 Weekly Operations b. Check the air cleaner, muffler, and exhaust pipes. Are they tight and secure? 1. Battery - check battery and terminals. 2. Wheel Cap Nuts - are they all in place and torqued properly - tighten if necessary. See Wheel Cap Nut Torque on page 5-140 . c. For vocational vehicles with optional engine air pre-cleaner, check the purge valve at the bottom of the hood mounted engine air precleaner for any obstructions. Make sure the purge valve will open and close as needed to purge dirt and water from the engine intake air. 3. Other Controls and Wiring - check for condition and adjustment 4.
Steering Components - check pitman arm, draglink, and power steering hoses, etc., for loose, broken, or missing parts. d. Automatic transmission fluid (when applicable) - Check level, after the engine has warmed up to operating temperature. 5. HVAC Fresh Air Filter - check for condition and cleanliness. 6. Other Engine Compartment Checks a. Check condition and fastening of engine belt, hoses, clamps, and radiator. 1-38