JUMP STARTING VEHICLES To Jump Start Your Vehicle CAUTION Preparing the vehicles: WARNING Improper hook-up of jumper cables or not following these procedures can damage the alternator or cause serious damage to both vehicles. 1. Remove any personal jewelry that may come in contact with the battery terminals. When jump starting using a battery booster, it is best to jump start with an equivalently powered vehicle. Verify that the booster battery has the same volt and CCA specifications as the dead battery before attempting to jump start. Failure to comply may cause an explosion resulting in death, personal injury, equipment or property damage. 2 2.
Select a jumper cable that is long enough to attach to both vehicles in a way that ensures neither vehicle touches each other. WARNING Heed all warnings and instructions of the jumper cable manufacturer. Failure to comply may result in death, personal injury, equipment or property damage. 3. Position the two vehicles together, but do not allow them to touch. 4. Turn OFF all lights, heater, radio, and any other accessory on both vehicles. CAUTION 5. Set the parking brakes: pull out the Yellow button located on the dash. Applying a higher voltage booster battery may cause expensive damage to sensitive electronic components, such as relays, Electronic Control units or electronics in general.
Failure to comply may result in equipment damage. 6. Shift the transmission into park position or neutral for manual transmissions. (See Operating the Transmission on page 4-18 and Parking Brake Valve on page 4-34 , for transmission shifting and parking brake information.) 2-9