INSTRUMENT PANEL The blank screen mode is selected through the rotary MCS knob. The Display OFF Mode is selected by pressing the button above the MCS knob for more than 2 seconds. Virtual Gauges Ignition Timer 3 The virtual gauges function is selected through the rotary MCS knob and is available in both parked and driving modes. This function allows the driver to set a timer to shut off the truck. This feature is only available when the vehicle is parked. After the timer is set, the ignition key may be turned to the off position and removed. The engine will continue to run for the programmed time. Virtual gauges provide dynamic information about the vehicle's performance.
Spin the MCS button to scroll through the available gauges and push to select the desired gauge to view. 3-23