INSTRUMENT PANEL Warning and Faults to see the different warnings. The highest priority warning defaults to the top of the stack. when parked. The menu selection shown in the image above simply won’t be there if the truck is driving, though the warnings and tell-tale indicators on the cluster will still be available as indicators if the problem is serious. Fault details screens include: When the vehicle is parked, the “Warnings and Faults” function will access suppressed pop-ups that are counted and presented in the upper left corner of the screen. 1.
how many faults, shown in a scrollable stack format 3 The display has a message alerting function that overrides the normal viewing and navigation of functions when an issue occurs on the truck. These alert messages are called “pop-ups” because they take over the screen. Some messages are low enough priority that they can be “suppressed”, which is done by pushing the MCS button. There will be a screen indicator showing which messages are suppressible. If multiple pop-ups are present at the same time, they are viewed in a stack format, and a spin of the MCS knob will allow you 2. which ECU the fault is being generated from 3. a text description of the issue 4. it’s actual fault code 5.
action instructions telling you what to do (i.e. seek service soon vs. correct at next scheduled service visit) By selecting “Review Warnings” the pop-up messages are recalled, and if multiple are active, the stack can be navigated by spinning the MCS knob. The warning description can be viewed when driving or when parked but the fault details are visible only An example of a Fault Details screen is shown below: 3-26