Komatsu — SWITCHES

. OPERATION DETAILED CONTROLS AND GAUGES This switch (9) is used to make it possible to carry out operations temporarilyif any problem should occur in the pump control system (when the display shows "E02"). (a) EMERGENCY: When abnormal (move switch up) (b) NORMAL: When normal (move switch down) If the display shows "E02", move the switch up to make it possible to carry out work. This switch (10) is used to make it possible to carry out operations temporarily if any problem should occur in the swing parking brake system (when the upper structure does not swing but the display does not show "E03"). (a) FREE: When abnormal (move switch up) (b) NORMAL:

When normal (move switch down) If the display does not show "E03", move the switch up to FREE position (a) to make it possible to carry out work. When the switch is moved to FREE position (a), the swing lock monitor flashes. Rotating Lamp Switch (If Equipped) Use this switch (11) to light up the yellow rotating lamp on top of the cab. (a) ON: Lamps light up (b) OFF: Lamps go off 3 - 74 Emergency Pump Drive Switc h able you to carry out operation temporarily, when any problem occurs on the pump control emergency. Furthermore, remove the cause of the problem immediately. NOTICE This switch is provided to en when any system. Do not use it except in emergency.

Furthermore, remove the cause of the problem immediately If this switch is depressed and moved to the EMERGENCY position by mistake, thereby engaging the machine in the work while the machine is in normal If "E02" is displayed during th condition, an "E02" mark is shown in th e display. e work, check that the switch is in the NORMAL position Swing Parking Brake Release Switch NOTICE This switch makes it possible to perform swing operations for a short eve n when there is a p roblem in the swing parking brake electric system. DO NOT use this switch except in emergencies. Repair th e problem as soon as possible.