. OPERATION MACHINE OPERATIONS AND CONTROLS WORKING MODE Working mode Applicable operations P mode Normal digging or loading operations (operations with emphasis on production) E mode Normal digging or loading operations (operations with emphasis on fuel consumption) L mode Aligning position (fine control operations) B mode Breaker operations ATT mode Operations with the crusher or other double-acting action attachment NOTICE Do not use the P mode for breaker operations. If breaker operations are carried out in the heavy-duty operation mode, there is a hazard that the hydraulic equipment may be damaged or broken. 1.
If working mode selector switch (1) is pressed, the working mode selection screen is displayed on the monitor. 3 - 156 Working Mode Use working m ode selector switch (1) t o select th e working mode that matches the operati ng conditions or pu rpose This will make it possible t o carry out operations efficiently Use the followi ng procedur e to select the most e fficient working mode. When the starti ng switch is turned ON, the worki ng mode i s set to the mode that was in op eration when the s tarting switch was l ast turned OFF Use the workin g mode swit ch to set th e mode to the most efficien mode to match the type of work