. MAINTENANCE MAINTENANCE PROCEDURE EVERY 250 HOURS MAINTENANCE WARNING UPPER LEVEL line. If the 4 - 48 CHECK LEVEL OF BATTERY ELECTROLY Carry out this procedure before o perating the ma Do not use th e battery if the batter y electrolyte level is below the L OWER LEVEL line. This will accel inside of the battery and reduce th e service life of th e battery. In a ddition, it may cause an explosio The battery g enerates flammable g as and there is da nger of explosion, do not bring fire or sparks n Battery electr olyte is dangerous. If it gets in your ey es or on your skin, wa sh it off with a large amou doctor.
NOTICE When adding distilled water to the battery, do not allow the battery electrolyte to go above the U gh, it may leak and cause damage to the paint surface or corrode other parts. electrolyte level is too hi gh, it may leak and c ause damage to th e paint surfac e or cor When adding distilled water in col d weather, add it before starting operations in the morning to pre freezing. Inspect the bat tery electrolyte lev el at least once a month and follow the basic safety proce Open the batt ery room door on t he left side of t he machine remove cover (1).
Then the batte ry can be found When Checking Electrolyte Level from Side of Bat If it is possible to check the electr olyte level from the side of t 1. Use a wet cloth to clean the area around the electrolyte level lines and check that the electrolyte level is between the UPPER LEVEL (U.L.) and LOWER LEVEL (L.L.) lines. If the battery is wiped with a dry cloth, static electricity may cause a fire or explosion. . Use a wet cloth to clean the area around the electrolyte l check that the e lectrolyte level is between VEL (U.L.) ry is wiped and LO WER LEVEL (L .L.) lines.