. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT switch F6. is pressed, the screen returns to the working screen without changing to the breaker If a slide arm or other special attachment is installed and the to the breaker mode by mistake, it may danger, such as the work equipment 6 - 19 1. mode selector s witch (1) or or F4 to select breaker mode B 2. With breaker mode B highligh following to ac Keep worki cept the selectio ng mode selecto Press switc Leave as it is for 5 seconds. 3. If t he breaker m ode is selected, "Really Set Break er Mode? " is mode switches F3 mode selec mode.
If a slide arm mode is sw lead to se suddenly dr Precautions when using stop valve is at the FREE position. working mode is B mode. e path of the oil, see "HYDRAULIC CIRCUIT (PAGE 6-8)". ing whether it is necessary to install an accumulator for the attachment circuit, contact the nufacturer and then decide. Check that the stop valve is at t he FREE p osition. Check that the working mode is B mode. For details of th e path of the oil, see "HYDRAULIC CIRCUI T (PAGE When consider ing whether it is necessary attachment ma nufacturer and th en decide. For other preca utions when han dling the br eaker, follow the instruction manual from the breaker manufacturer and use the bre aker correctly.
The deterioratio n of the hydraulic oil when us ing the breaker i s much f aster than for nor mal operations, so reduce the maintenanc e interval for the hydraulic o il and e lement. For details, see "MAINTENANC E INTERVA L FOR HYDRAULIC