11 10 9 8 7 6 5 4 3 2 1 Improper adjustment of the speed limiter and throttle could cause throttle cable damage or improper throttle operation. You could lose control, have an accident or be injured. Do not turn the adjusting screw out more than 12 mm (0.47 in) or the throttle cable could be dam- EWB00240 3. Tighten the locknut. 1. Locknut 2. Adjusting screw 3. No more than 12 mm (0.47 in) WARNING and the maximum speed of the ATV, turn the adjusting screw in direction (b). 3 1 2 (a) (b) 4-4 1. Clutch lever EBU18372 Clutch lever The clutch lever is located on the left handlebar. To disengage the clutch, pull the clutch lever toward the handlebar grip.
To engage the clutch, release the clutch lever. The clutch lever should be pulled rapidly and released slowly for smooth clutch oper- ation. aged. Always make sure the throttle lever free play is adjusted to 4.0–6.0 mm (0.16–0.24 in). (See page 8-31.) 1