11 10 9 8 7 6 5 4 3 2 1 Chassis fasteners G Make sure that all nuts, bolts and screws are properly tightened. 5-7 Instruments, lights and switches Brake and clutch levers Brake and shift pedals Wheels and tires Drive chain Control cables 8-42 Throttle lever Clutch Rear brake Front brake ITEM PAGE G Check operation, and correct if necessary. 5-7 G Make sure that operation is smooth. Lubricate lever pivoting points if necessary. 8-43 if necessary. 8-43 5-5, 5-6, 5-6 5-4, 8-39, 8-41 5-4, 8-31 8-38 5-2 5-3, 8-32, 8-33, 8-35 5-3, 8-32, 8-33, 8-34 ROUTINE PAGE Check operation. If soft or spongy, have Yamaha dealer bleed G hydraulic system. Check brake pads for wear, and replace if necessary.
G Check brake fluid level in reservoir, and add recommended brake G fluid to specified level if necessary. Check hydraulic system for leakage. Correct if necessary. G 5-3, 8-32, 8-33, 8-34 Check operation. If soft or spongy, have Yamaha dealer bleed G hydraulic system. Check brake pads for wear, and replace if necessary. G Check brake fluid level in reservoir, and add recommended brake G fluid to specified level if necessary. Check hydraulic system for leakage. Correct if necessary. G 5-3, 8-32, 8-33, 8-35 Check operation, and correct if necessary. G Lubricate cable if necessary. G Check lever free play, and adjust if necessary. G 8-38 Make sure that operation is smooth.
Lubricate cable and lever hous- G ing if necessary. Check cable free play, and adjust if necessary. G 5-4, 8-31 Make sure that operation is smooth. Lubricate if necessary. G 8-42 Check chain slack, and adjust if necessary. G Check chain condition. Lubricate if necessary. G 5-4, 8-39, 8-41 Check wheel condition, and replace if damaged. G Check tire condition and tread depth. Replace if necessary. G Check air pressure. Correct if necessary. G 5-5, 5-6, 5-6 Make sure that operation is smooth. Lubricate pedal pivoting points G if necessary. 8-43 Make sure that operation is smooth. Lubricate lever pivoting points G if necessary.
8-43 Make sure that all nuts, bolts and screws are properly tightened. G 5-7 Check operation, and correct if necessary. G 5-7