11 10 9 8 7 6 5 4 3 2 1 Brake operation Test the brakes at slow speed after starting out to make sure they are working properly. If the brakes do not provide proper braking performance, check the brake pads for wear. (See page 8-32.) Brake fluid leakage Check to see if any brake fluid is leaking out of the pipe joints or brake fluid reservoirs. Apply the brakes firmly for one minute. If there is any leak- age, have a Yamaha dealer check the brake sys- tem. Recommended brake fluid: DOT 4 Brake fluid level Check the brake fluid level. Add fluid if necessary. (See page 8-33.) page 8-35.) If the pedal height is incorrect, have a Yamaha dealer adjust it.
G Check the operation of the lever and pedal. They should move smoothly and there should be a firm feeling when the brakes are applied. If not, have a Yamaha dealer check the brake system. 5-4 EBU19770 Drive chain Check the condition of the drive chain and check the drive chain slack. Lubricate and adjust the drive chain as necessary. (See page 8-39.) EBU19761 Throttle lever Check the operation of the throttle lever. It must open smoothly and spring back to the idle position when released. Have a Yamaha dealer correct if necessary. Always check the brakes at the start of every ride.
Do not ride the ATV if you find any prob- lem with the brakes or you could lose braking ability, which could lead to an accident. If a problem cannot be corrected by the adjust- ment procedures provided in this manual, have a Yamaha dealer check for the cause. EWB00580 WARNING