18 * cables 17 16 15 * 14 * assemblies 13 * 12 * 11 Drive chain 10 * arm pivots 9 * NO. Every 2 years 160 160 320 2500 (1600) 2500 (1600) 5000 (3200) 6 6 12 EVERY 11 10 9 8 7 6 5 4 3 2 1 ITEM CHECK OR MAINTENANCE JOB Whichev- month er comes km first (mi) hours INITIAL EVERY month 1 3 6 6 12 km (mi) 320 (200) 1300 (800) 2500 (1600) 2500 (1600) 5000 (3200) hours 20 80 160 160 320 Wheel hub bearings Check for looseness or damage, and replace if G necessary. √ √ √ √ Upper and lower arm pivots Lubricate with lithium-soap-based grease. G √ √ √ Drive chain Check chain slack and adjust if necessary. G Check rear wheel alignment and correct if necess- G sary. Clean and lubricate.
G √ √ √ √ Drive chain rollers Check for wear and replace if necessary. G √ √ √ Chassis fasteners Make sure that all nuts, bolts, and screws are G properly tightened. √ √ √ √ √ Shock absorber assemblies Check operation and correct if necessary. G Check for oil leakage and replace if necessary. G √ √ √ Steering system Check operation and repair or replace if damaged. G Check toe-in and adjust if necessary. G √ √ √ √ √ Transmission oil Change. G Check ATV for oil leakage, and correct if neces- G sary. √ √ √ √ Cooling system Check coolant level and ATV for coolant leakage, G and correct if necessary. √ √ √ √ √ Replace coolant. G Every 2 years Moving parts and cables Lubricate. G √ √ √ √