Yamaha YFZ350X — PERIODIC MAINTENANCE AND MINOR REPAIR

9. Connect the coolant reservoir hose. 10. Pour the recommended coolant into the reser- 7. After draining the coolant, thoroughly flush the cooling system with clean tap water. 8. Replace the coolant drain bolt washers if they are damaged, and then tighten the coolant drain bolts to the specified torque. 1. Coolant reservoir hose 2. Coolant reservoir Tightening torque: Coolant drain bolt: 10 Nm (1.0 m·kgf, 7 ft·lbf) 2 1 8-16 G If coolant is not available, use distilled water or soft tap water instead. Do not use hard wa- ter or salt water since it is harmful to the en- gine.

G If water has been used instead of coolant, re- place it with coolant as soon as possible, otherwise the cooling system will not be pro- CAUTION: ECB00401 voir to the maximum level mark, and then in- stall the reservoir cap. 11. Pour the recommended coolant into the radia- tor until it is full. Antifreeze/water mixture ratio: 1:1 Recommended antifreeze: High-quality ethylene glycol antifreeze con- taining corrosion inhibitors for aluminum en- gines Coolant quantity: Radiator capacity (including all routes): 1.50 L (1.59 US qt) (1.32 Imp.qt) Coolant reservoir capacity (up to the maxi- mum level mark): 0.28 L (0.30 US qt) (0.25 Imp.qt) 11 10 9 8 7 6 5 4 3 2 1