11 10 9 8 7 6 5 4 3 2 1 6. Squeeze the excess solvent out of the sponge material and let it dry. Always use parts cleaning solvent to clean the sponge material. Never use low-flash-point solvents or gasoline to clean the sponge mate- rial because the engine could catch fire or ex- plode. EWB01940 5. Wash the sponge material gently but thor- oughly in solvent. 1. Sponge material 2. Air filter element frame 3. Air filter element lock plate WARNING 1 2 2 1 3 8-19 9. Pull the sponge material over the air filter ele- ment frame, and then install the lock plate by NOTE: The sponge material should be wet but not drip- ping. 7. Check the sponge material and replace it if damaged. 8.
Apply a quality foam air filter oil to the sponge material. Do not twist the sponge material when squeez- ing it. CAUTION: ECB00440