G After servicing the carburetors, always check the throttle lever operation before op- G Do not perform this procedure while the en- gine is hot. Place a rag under each carbure- tor to catch any fuel. Wipe up any spilled fuel completely. G Carburetor adjustments should only be per- formed by a Yamaha dealer. Do not attempt to perform these procedures unless you have mechanical knowledge and the neces- sary tools. G Improperly servicing or adjusting the carbu- retors could cause them to malfunction with the possibility of an accident, or the carbure- tors could leak fuel, which would be a fire hazard.
EWB01990 EBU23992 Changing the carburetor settings In extremely cold weather, it is necessary to change the carburetor settings to maintain opti- mum engine performance and to prevent engine damage. WARNING 8-22 1. Main jet number Main jet #200 Jet needle clip position 3rd groove Pilot air screw 2.0 turns out erating the ATV to make sure it is working correctly. Standard settings 1 11 10 9 8 7 6 5 4 3 2 1 Standard settings Main jet #200 Jet needle clip position 3rd groove Pilot air screw 2.0 turns out