Komatsu — ON SLOPES

OPERATION 2 PRECAUTIONS FOR OPERATION 2 PERMISSIBLE WATER DEPTH When operating in water, always keep the bottom of the carrier roller above the surface of the water. Also, be careful that the engine cooling fan will not come in contact with water. The fan can be damaged. 2 WHEN TRAVELING UP OR DOWN HILLS 2 Use Engine as a Brake When going downhill, shift the transmission lever into 1st speed to run the engine at a slower speed and travel down the slope using the engine as a brake. Never coast down the slope with the transmission lever in the N (neutral) position. 2 Braking When Traveling Downhill While descending a slope using the engine as a brake, also apply the brakes.

Failure to brake may result in over running, causing engine trou- ble. 2 ON SLOPES 2 Be Careful of Fuel Level If the fuel level in the fuel tank becomes low when working on slopes, the engine may intake air because of the angle or the swaying of the ma- chine. If this makes the engine stop, be careful not to let the level in the fuel tank become too low. 2 Precautions When Engine Stops on Slopes If the engine stops while working or traveling on a hill, immediately de- press the brake pedal, lower the blade to the ground to stop the machine, then lock the brake pedal with the brake lock lever.

Thereafter, move the transmission lever to the N (neutral) position, lock the lever, then restart the engine. 2-60 D87E-2 D87P-2