OPERATION 2 PARKING THE MACHINE Avoid stopping suddenly. Give yourself ample room when stopping. When stopping the machine, select flat hard ground and avoid dan- gerous places. If it is unavoidably necessary to park the machine on a slope, insert blocks underneath the track shoes. As an additional safety measure, thrust the blade into the ground. If the control lever is touched by accident, the work equipment or the machine may move suddenly, and this may lead to a serious accident. Before leaving the operator’s compartment, always apply the lock se- curely. 1. Move the engine speed control lever forward to the low idle posi- tion ( A ). 2.
Depress the brake pedal until the machine is stopped. 3. Place the transmission lever in NEUTRAL. 4. Place the safety lock lever in the locked, (up) position. 5. Lock the brake pedal. 6. Lower all mounted equipment to the ground. D87E-2 D87P-2 2-63