Komatsu — INSTRUMENTS AND WARNING LIGHTS

MAINTENANCE 3 INSTRUMENT PANEL Thoroughly clean the faces of the gauges and warning lights. 3 WINDOW WASHER RESERVOIR Open the left engine access door. Remove cap and fill washer fluid. In- stall cap when filled. 3 AIR CLEANER CAP The dome of the air cleaner cap serves as a rain shield and prevents chaff and course dirt from getting into the air cleaner. Keep this area clean from all chaff. A clogging will reduce the power of the engine by restricting the flow of air. Loosen the clamp screw on the air cleaner cap. Twist and pull upward to remove the cap. Use compressed air to clean the screen.

If compressed air is not available, wash in clean hot water or water containing a small amount of nonsudsing detergent. Remark Never wash air cleaner cap when it is installed on the ma- chine as water may penetrate to the engine. 3 DRIVE BELTS AND FAN Visually inspect the belts and fan for damage. 3 GROUND LEVEL INSPECTION Perform ground level inspection, see “GROUND LEVEL INSPEC- TION” on page 2-30 3 INSTRUMENTS AND WARNING LIGHTS Check that the instruments and warning lights are working, see “GAUGES AND WARNING LIGHTS” on page 2-9 3-28 D87E-2 D87P-2