MAINTENANCE 3 CHANGE DRIVE TRAIN SYSTEM OIL When working under the machine, turn off the electrical system master switch and tag the controls to warn against starting the machine. 1. Remove the drain plug immediately after operation while the lubri- cant is still warm. Drain into a suitable container. 2. After the system has been completely drained, reinstall and tighten the drain plug. 3. Open the rear access door. Unscrew the T handle of the oil level gauge, remove the gauge and wipe it clean. 4. Pour lubricant into the rear frame through the filler tube to bring the level up to the FULL mark on the gauge. Insert level gauge.
For details of oil to use, see “USE OF FUEL, COOLANT AND LU- BRICANTS” on page 3-7. 3 DRIVE TRAIN SUCTION STRAINER 1. Open the left access side door. Remove all outside dirt from the suction strainer. 3-34 D87E-2 D87P-2