Komatsu — PILOT VALVE PLATE SURFACE LUBRICATION

MAINTENANCE 2. Remove the filter from the box. Clean inside of the filter box. 3. Clean filter with compressed air. If it is extremely dirty, wash it in a neutral agent. After washing, dry completely before installing again. Remark If clogging of the filter cannot be removed by washing or us- ing compressed air, replace the filter with a new one. 3 DRAIN FUEL TANK SEDIMENT BOWL 1. Open the rear access cover. 2. Position drain hose (1) outside of machine into a suitable container. Open the valve (2) and drain water and sediment from the fuel tank until clean diesel fuel appears. Close the valve. 3. Insert drain hose and close rear access cover.

3 PILOT VALVE PLATE SURFACE LUBRICATION Apply a generous coat of clean MPG to plunger plate surface and the contact areas of the plungers. D87E-2 D87P-2 3-71