MAINTENANCE 3 LINKAGE LUBRICATION NOTE: This added page shows the differences for machines equipped with Single Lever Transmission/Steering Control. Front Lower Throttle Lever (1) 1 FITTING 3 Apply grease until clean lubricant is visible. Always use a clean lubrica- tor and wipe dirt from fittings before fresh grease is applied. If grease fails to go through the fitting, determine the cause and correct it. After greasing, wipe off any old grease that was purged. Brake Pedal Support (2) 1 FITTING Apply grease until clean lubricant is visible. Always use a clean lubrica- tor and wipe dirt from fittings before fresh grease is applied.
If grease fails to go through the fitting, determine the cause and correct it. After greasing, wipe off any old grease that was purged. Brake Rod Lever (3) 1 FITTING Apply grease until clean lubricant is visible. Always use a clean lubrica- tor and wipe dirt from fittings before fresh grease is applied. If grease fails to go through the fitting, determine the cause and correct it. After greasing, wipe off any old grease that was purged. Brake Valve Lever (4) 1 FITTING 3 Apply grease until clean lubricant is visible. Always use a clean lubrica- tor and wipe dirt from fittings before fresh grease is applied. If grease fails to go through the fitting, determine the cause and correct it.
After greasing, wipe off any old grease that was purged. D87E-2 D87P-2 3-73