OPERATION 2 ENGINE OIL PRESSURE GAUGE The gauge (13) registers the pressure at which the lube oil is circulated through the engine. The pointer must register in green area immediately upon engine starting and when the engine is operated at full load speeds. 2 HOURMETER The hourmeter (14) electrically records the actual hours of engine oper- ation. The purpose of the hourmeter is to indicate when to perform the recommended maintenance and lubrication operations. The hourmeter will register only when the engine is running. While the engine is run- ning, the display at the end of the meter will advance in 1/10 hour incre- ments and 1 for each hour of operation regardless of the engine speed.
2 VISUAL WARNING ALARM This light (15) will illuminate when one and/or all of the following situ- ations arise; Engine coolant level.................................................................LOW Engine oil pressure.................................................................. LOW Engine coolant temperature ....................................................HIGH Torque converter oil temperature............................................HIGH 15 16 Transmission clutch pressure .................................................. LOW Stop the machine and find out which warning light is aglow and check gauge indication.
2 AUDIO WARNING ALARM This alarm (16) will sound when one and/or the other following situa- tions arise; Engine coolant level................................................................ LOW Engine oil pressure.................................................................. LOW Stop the machine and find out which warning light is aglow. Check the gauge indication. Engine coolant temperature ....................................................HIGH Torque converter oil temperature............................................HIGH Transmission clutch pressure ...................................................LOW 2-12 D87E-2 D87P-2