Komatsu — SAFETY LOCK LEVER

OPERATION 2 CONTROL LEVERS Left Side Controls Right Side Controls 1. Fuel Control Lever 3. Transmission Lever 5. Blade Control Lever 2. Safety Lock Lever 4. Steering Levers 6. Ripper Control Lever 2 FUEL CONTROL LEVER This lever (1) is used to control the engine speed and output. A Engine Shut Off (First notch forward) B Low Idle (Second notch forward) C Mid Range Idle (4th or 5th notch) D High Idle (Last notch rearward) 2 SAFETY LOCK LEVER When leaving the operator’s compartment, position the safety lock le- ver securely to the LOCK position. If this lever is not locked and the transmission lever is touched by mistake, this may lead to a serious ac- cident.

If the lever is not placed securely in LOCK position, the trans- mission lever may not be properly locked. This lever (2) locks the transmission lever. Push forward to release (un- lock) the lever. Pull rearward to apply (lock) the lever. Remark The lever must be in the LOCK (up) position to start engine. D87E-2 D87P-2 2-23