OPERATION 2 LOCKING CAP The fuel (1) and hydraulic (2) tank filler ports are each equipped with a locking cap. Use the start switch key to lock and unlock the cap. 2 OPENING 1. Move lock cover back and insert key into the cap. Ensure that the key is fully inserted up to its shoulder before turning. If the key is turned when only partially inserted, it could break. 2. Turn the key counterclockwise to align the match mark on the cap with the rotor groove, then turn the cap slowly. When a click is heard, the lock is released, enabling the cap to be removed. 2 LOCKING 1. Install cap and turn into place. Turn the key clockwise to the lock mark and take the key out.
Move lock cover in place over key entry. Remark If the breather hole on the cap is clogged, pressure in the tank will drop and fuel will not flow. Clean the hole from time to time. D87E-2 D87P-2 2-29