OPERATION 2 OPERATIONS AND CHECKS BEFORE STARTING ENGINE If any of the control levers are touched by accident, the work equip- ment or the machine may move suddenly. When leaving the operator’s compartment, always set the safety lever securely to the LOCK posi- tion. 1. Check that the brake pedal is applied with the lock. 2. Check that the safety lock lever is engaged (up position). 3. Check that the mounted equipment is lowered on the ground or properly blocked and the blade control lever is in the hold position. 4. Turn the master disconnect switch to the on position (clockwise). 5.
Push the rocker switches and check that the roof mounted front and rear work lights (x4) and the front hood and fuel tank lights (x3) are on and the instrument panel gauges are illuminated. 2-38 D87E-2 D87P-2