Komatsu — NORMAL STARTING

OPERATION 2 STARTING ENGINE Remark This engine cannot be started by towing, pushing or coasting the machine. Before entering the operator’s area walk completely around the ma- chine and clear the area of personnel and obstructions. Understand all control functions before starting the engine. Sound the horn. Make sure the operator’s seat is adjusted properly and fas- ten the safety seat belt. Never start the engine indoors unless proper exhaust ventilation is provided to remove deadly exhaust gases. Once the engine is running, move the machine outdoors as soon as possible. Exhaust gases are hazardous and can cause unconsciousness and death.

Read all warning product graphics before starting, operating, main- taining, or repairing the machine. Do not jump on or off the machine. Keep two hands and one foot, or two feet and one hand, in contact with the steps and hand holds at all times. Place objects on machine from ground level before climbing on. Always face the machine when climbing on or off to reduce the chances of slipping and injury. 2 NORMAL STARTING 1. Move the fuel control lever to the 1/2 speed position ( A ) (mid range) for temperatures above 10°C (50°F). Move the engine speed control lever to the full speed position ( B ) for temperatures below 10°C (50°F). 2.

Sound the horn to clear all personal from the immediate area. D87E-2 D87P-2 2-43