OPERATION 2 OPERATIONS AND CHECKS AFTER ENGINE STARTS After starting the engine, do not immediately start any operations. First, carry out the following operations and checks. Remark Avoid abrupt acceleration until warm up run is completed. Do not run the engine at low idle or high idle for more than 20 minutes. If it is necessary to run the engine at idle, apply a load or run at a medium speed from time to time. 2 NORMAL OPERATION 1. Pull throttle lever to the center position ( A ) between low and high idle and run the engine at medium speed for about 5 minutes with no load. 2. After warm up run is completed, check gauges and warning lights for proper operation.
If any abnormality is found, repair it. Con- tinue to run the engine at light load until the engine coolant temper- ature gauge indicator falls within the green range. 3. Check that there is no abnormal exhaust gas color, noise, or vibra- tion. If any abnormality is found, repair it. 2-48 D87E-2 D87P-2