mercedes-benz Unimog Model Series 405 — UGE_Euro6_en.pdf

Design Cab exterior Cab concept The open-view cab presents itself in a new, modern design, while the visual and functional effect of the short engine hood is emphasized even further. LED lamps with daytime running lamps are integrated in the new bumpers. To improve visibility, the windshield wipers are now located above the windshield. The view of the road surface and implements is optimal. Roof-mounted wiper system A newly developed roof-mounted wiper system wipes snow to the side. This prevents snow from building up over the en- gine hood. Since the wiper blades are no longer installed in the field of view but on the roof, the view towards the front is improved.

Fields of vision The open-view cab provides an excellent 360 degree view with minimal blind spots. The windshield, which extends far down towards the engine hood, and the low side windows provide for an excellent view of the working area. The view of the road surface and implements, for coupling and uncoup- ling, is optimal. Visibility is further improved by the new front camera monitor system (optional, code EM3). The large rear window panels provide a direct view of the working area to the rear. In order to minimize the effect of impacts from the road sur- face, the cab is sprung and dampened.

The seat position be- hind the front axle provides a high level of ride comfort and, when not driving, a generous amount of space. The entrance behind the front axle, with a door opening angle of almost 90°, allows the driver to enter and exit the vehicle safely and conveniently using 3 steps. Cab G60.80-3424-00 56 Introduction of the New Unimog Generation | Model Series 405 – This printout will not be recorded by the update service. Status: 03 / 2013 –