Overall network Networking Coding adapter for variable wiring of equipment sockets Using the coding adapter, various function assignments for the pins of the equipment socket (code E87) and equipment sockets (code ES6, not yet available) can be changed. The following signals are available optionally for standard configuration:
• Brake light • Right turn signal/left turn signal • Activate rotating beacon from vehicle • Horn actuation • CAN interface for hydraulic control/PSM (parameteriz- able special module) • Rpm control request • Signal D+ (engine running) • External operating unit deactivated • Standstill V0 signal • Transmission in neutral position 0 Coding adapter under rear stowage box G54.15-3164-00 Cab-frame connecting points The connecting points from the cab to the frame are now located on the firewall on the right-hand side of the engine compartment, which improves their accessibility.
Right engine compartment connecting point G54.18-3301-00 Co-driver footwell connecting point G54.18-3300-00 Introduction of the New Unimog Generation | Model Series 405 67 – This printout will not be recorded by the update service. Status: 03 / 2013 –